Ultrathin silicon nitride microchip for in situ/operando microscopy with high spatial resolution and spectral visibility.

Utilization of in situ/operando methods with broad beams and localized probes has accelerated our understanding of fluid-surface interactions in recent decades. The closed-cell microchips based on silicon nitride (SiNx) are widely used as "nanoscale reactors" inside the high-vacuum electron microscopes. However, the field has been stalled by the high background scattering from encapsulation (typically ~100 nanometers) that severely limits the figures of merit for in situ performance. This adverse effect is particularly notorious for gas cell as the sealing membranes dominate the overall scattering, thereby blurring any meaningful signals and limiting the resolution. Herein, we show that by adopting the back-supporting strategy, encapsulating membrane can be reduced substantially, down to ~10 nanometers while maintaining structural resiliency. The systematic gas cell work demonstrates advantages in figures of merit for hitherto the highest spatial resolution and spectral visibility. Furthermore, this strategy can be broadly adopted into other types of microchips, thus having broader impact beyond the in situ/operando fields.

van der Waals Epitaxy, Superlubricity, and Polarization of the 2D Ferroelectric SnS.

Tin monosulfide (SnS) is a two-dimensional layered semiconductor that exhibits in-plane ferroelectric order at very small thicknesses and is of interest in highly scaled devices. Here we report the epitaxial growth of SnS on hexagonal boron nitride (hBN) using a pulsed metal-organic chemical vapor deposition process. Lattice matching is observed between the SnS(100) and hBN{11̅0} planes, with no evidence of strain. Atomic force microscopy reveals superlubricity along the commensurate direction of the SnS/hBN interface, and first-principles calculations suggest that friction is controlled by the edges of the SnS islands, rather than interface interactions. Differential phase contrast imaging detects remnant polarization in SnS islands with domains that are not dictated by step-edges in the SnS. The growth of ferroelectric SnS on high quality hBN substrates is a promising step toward electrically switchable ferroelectric semiconducting devices.

Unlocking the mysterious polytypic features within vaterite CaCO3.

Calcium carbonate (CaCO3), the most abundant biogenic mineral on earth, plays a crucial role in various fields such as hydrosphere, biosphere, and climate regulation. Of the four polymorphs, calcite, aragonite, vaterite, and amorphous CaCO3, vaterite is the most enigmatic one due to an ongoing debate regarding its structure that has persisted for nearly a century. In this work, based on systematic transmission electron microscopy characterizations, crystallographic analysis and machine learning aided molecular dynamics simulations with ab initio accuracy, we reveal that vaterite can be regarded as a polytypic structure. The basic phase has a monoclinic lattice possessing pseudohexagonal symmetry. Direct imaging and atomic-scale simulations provide evidence that a single grain of vaterite can contain three orientation variants. Additionally, we find that vaterite undergoes a second-order phase transition with a critical point of ~190 K. These atomic scale insights provide a comprehensive understanding of the structure of vaterite and offer advanced perspectives on the biomineralization process of calcium carbonate.

Iron oxide nanozymes stabilize stannous fluoride for targeted biofilm killing and synergistic oral disease prevention.

Dental caries is the most common human disease caused by oral biofilms despite the widespread use of fluoride as the primary anticaries agent. Recently, an FDA-approved iron oxide nanoparticle (ferumoxytol, Fer) has shown to kill and degrade caries-causing biofilms through catalytic activation of hydrogen peroxide. However, Fer cannot interfere with enamel acid demineralization. Here, we show notable synergy when Fer is combined with stannous fluoride (SnF2), markedly inhibiting both biofilm accumulation and enamel damage more effectively than either alone. Unexpectedly, we discover that the stability of SnF2 is enhanced when mixed with Fer in aqueous solutions while increasing catalytic activity of Fer without any additives. Notably, Fer in combination with SnF2 is exceptionally effective in controlling dental caries in vivo, even at four times lower concentrations, without adverse effects on host tissues or oral microbiome. Our results reveal a potent therapeutic synergism using approved agents while providing facile SnF2 stabilization, to prevent a widespread oral disease with reduced fluoride exposure.

Formation mechanism of high-index faceted Pt-Bi alloy nanoparticles by evaporation-induced growth from metal salts.

Nanoparticles with high-index facets are intriguing because such facets can lend the structure useful functionality, including enhanced catalytic performance and wide-ranging optical tunability. Ligand-free solid-state syntheses of high index-facet nanoparticles, through an alloying-dealloying process with foreign volatile metals, are attractive owing to their materials generality and high yields. However, the role of foreign atoms in stabilizing the high-index facets and the dynamic nature of the transformation including the coarsening and facet regulation process are still poorly understood. Herein, the transformation of Pt salts to spherical seeds and then to tetrahexahedra, is studied in situ via gas-cell transmission electron microscopy. The dynamic behaviors of the alloying and dealloying process, which involves the coarsening of nanoparticles and consequent facet regulation stage are captured in the real time with a nanoscale spatial resolution. Based on additional direct evidence obtained using atom probe tomography and density functional theory calculations, the underlying mechanisms of the alloying-dealloying process are uncovered, which will facilitate broader explorations of high-index facet nanoparticle synthesis.

Effects of the Encapsulation Membrane in Operando Scanning Transmission Electron Microscopy.

Nanoscale tailoring of catalytic materials and Li-battery alternatives has elevated the importance of in situ gas-phase electron microscopy. Such advanced techniques are often performed using an environmental cell inserted into a conventional S/TEM setup, as this method facilitates concurrent electrochemical and temperature stimulations in a convenient and cost-effective manner. However, these cells are made by encapsulating gas between two insulating membranes, which introduces additional electron scattering. We have evaluated strengths and limitations of the gas-phase E-cell S/TEM technique, both experimentally and through simulations, across a variety of practical parameters. We reveal the degradation of image quality in an E-cell setup from various components and explore opportunities to improve imaging quality through intelligent choice of experimental parameters. Our results underscore the benefits of using an E-cell STEM technique, due to its versatility and excellent ability to suppress the exotic contributions from the membrane device.

Uncovering the crystal defects within aragonite CaCO3.

Knowledge of deformation mechanisms in aragonite, one of the three crystalline polymorphs of CaCO3, is essential to understand the overall excellent mechanical performance of nacres. Dislocation slip and deformation twinning were claimed previously as plasticity carriers in aragonite, but crystallographic features of dislocations and twins have been poorly understood. Here, utilizing various transmission electron microscopy techniques, we reveal the atomic structures of twins, partial dislocations, and associated stacking faults. Combining a topological model and density functional theory calculations, we identify complete twin elements, characters of twinning disconnection, and the corresponding twin shear angle (∼8.8°) and rationalize unique partial dislocations as well. Additionally, we reveal an unreported potential energy dissipation mode within aragonite, namely, the formation of nanograins via the pile-up of partial dislocations. Based on the microstructural comparisons of biogenic and abiotic aragonite, we find that the crystallographic features of twins are the same. However, the twin density is much lower in abiotic aragonite due to the vastly different crystallization conditions, which in turn are likely due to the absence of organics, high temperature and pressure differences, the variation in inorganic impurities, or a combination thereof. Our findings enrich the knowledge of intrinsic crystal defects that accommodate plastic deformation in aragonite and provide insights into designing bioengineering materials with better strength and toughness.

Persistent polyamorphism in the chiton tooth: From a new biomineral to inks for additive manufacturing.

Engineering structures that bridge between elements with disparate mechanical properties are a significant challenge. Organisms reap synergy by creating complex shapes that are intricately graded. For instance, the wear-resistant cusp of the chiton radula tooth works in concert with progressively softer microarchitectural units as the mollusk grazes on and erodes rock. Herein, we focus on the stylus that connects the ultrahard and stiff tooth head to the flexible radula membrane. Using techniques that are especially suited to probe the rich chemistry of iron at high spatial resolution, in particular synchrotron Mössbauer and X-ray absorption spectroscopy, we find that the upper stylus of Cryptochiton stelleri is in fact a mineralized tissue. Remarkably, the inorganic phase is nano disperse santabarbaraite, an amorphous ferric hydroxyphosphate that has not been observed as a biomineral. The presence of two persistent polyamorphic phases, amorphous ferric phosphate and santabarbaraite, in close proximity, is a unique aspect that demonstrates the level of control over phase transformations in C. stelleri dentition. The stylus is a highly graded material in that its mineral content and mechanical properties vary by a factor of 3 to 8 over distances of a few hundred micrometers, seamlessly bridging between the soft radula and the hard tooth head. The use of amorphous phases that are low in iron and high in water content may be key to increasing the specific strength of the stylus. Finally, we show that we can distill these insights into design criteria for inks for additive manufacturing of highly tunable chitosan-based composites.

Plasmonic Photoelectrocatalysis in Copper-Platinum Core-Shell Nanoparticle Lattices.

This paper reports that strongly coupled bimetallic core-shell nanoparticle arrays show photoelectrocatalytic activity for hydrogen evolution reactions (HER). We fabricated large-area Cu-Pt nanoparticle lattices by combining top-down lithography and solution-based chemistry. These coupled lattices support two different types of plasmon modes, localized surface plasmons from individual particles and surface lattice resonances (SLRs) from the 2D lattice, that increased HER catalytic activity under white-light illumination up to 60%. Comparing photoelectrocatalytic performances of the two plasmon modes at different wavelength ranges, we found that SLRs had two-fold activity enhancement over that from localized surface plasmons.

Ultranarrow plasmon resonances from annealed nanoparticle lattices.

This paper reports how the spectral linewidths of plasmon resonances can be narrowed down to a few nanometers by optimizing the morphology, surface roughness, and crystallinity of metal nanoparticles (NPs) in two-dimensional (2D) lattices. We developed thermal annealing procedures to achieve ultranarrow surface lattice resonances (SLRs) with full-width at half-maxima linewidths as narrow as 4 nm from arrays of Au, Ag, Al, and Cu NPs. Besides annealing, we developed a chemical vapor deposition process to use Cu NPs as catalytic substrates for graphene growth. Graphene-encapsulated Cu NPs showed the narrowest SLR linewidths (2 nm) and were stable for months. These ultranarrow SLR nanocavity modes supported even narrower lasing emission spectra and high nonlinearity in the input-output light-light curves.

Chemical gradients in human enamel crystallites.

Dental enamel is a principal component of teeth1, and has evolved to bear large chewing forces, resist mechanical fatigue and withstand wear over decades2. Functional impairment and loss of dental enamel, caused by developmental defects or tooth decay (caries), affect health and quality of life, with associated costs to society3. Although the past decade has seen progress in our understanding of enamel formation (amelogenesis) and the functional properties of mature enamel, attempts to repair lesions in this material or to synthesize it in vitro have had limited success4-6. This is partly due to the highly hierarchical structure of enamel and additional complexities arising from chemical gradients7-9. Here we show, using atomic-scale quantitative imaging and correlative spectroscopies, that the nanoscale crystallites of hydroxylapatite (Ca5(PO4)3(OH)), which are the fundamental building blocks of enamel, comprise two nanometric layers enriched in magnesium flanking a core rich in sodium, fluoride and carbonate ions; this sandwich core is surrounded by a shell with lower concentration of substitutional defects. A mechanical model based on density functional theory calculations and X-ray diffraction data predicts that residual stresses arise because of the chemical gradients, in agreement with preferential dissolution of the crystallite core in acidic media. Furthermore, stresses may affect the mechanical resilience of enamel. The two additional layers of hierarchy suggest a possible new model for biological control over crystal growth during amelogenesis, and hint at implications for the preservation of biomarkers during tooth development.

Publisher Correction: Chemical gradients in human enamel crystallites.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

In Situ Ni2+ Stain for Liposome Imaging by Liquid-Cell Transmission Electron Microscopy.

Solvated soft matter, both biological and synthetic, can now be imaged in liquids using liquid-cell transmission electron microscopy (LCTEM). However, such systems are usually composed solely of organic molecules (low Z elements) producing low contrast in TEM, especially within thick liquid films. We aimed to visualize liposomes by LCTEM rather than requiring cryogenic TEM (cryoTEM). This is achieved here by imaging in the presence of aqueous metal salt solutions. The increase in scattering cross-section by the cation gives a staining effect that develops in situ, which could be captured by real space TEM and verified by in situ energy dispersive x-ray spectroscopy (EDS). We identified beam-induced staining as a time-dependent process that enhances contrast to otherwise low contrast materials. We describe the development of this imaging method and identify conditions leading to exceptionally low electron doses for morphology visualization of unilamellar vesicles before beam-induced damage propagates.

Charge Separation in Epitaxial SnS/MoS2 Vertical Heterojunctions Grown by Low-Temperature Pulsed MOCVD.

The weak van der Waals bonding between monolayers in layered materials enables fabrication of heterostructures without the constraints of conventional heteroepitaxy. Although many novel heterostructures have been created by mechanical exfoliation and stacking, the direct growth of 2D chalcogenide heterostructures creates new opportunities for large-scale integration. This paper describes the epitaxial growth of layered, p-type tin sulfide (SnS) on n-type molybdenum disulfide (MoS2) by pulsed metal-organic chemical vapor deposition at 180 °C. The influence of precursor pulse and purge times on film morphology establishes growth conditions that favor layer-by-layer growth of SnS, which is critical for materials with layer-dependent electronic properties. Kelvin probe force microscopy measurements determine a built-in potential as high as 0.95 eV, and under illumination a surface photovoltage is generated, consistent with the expected Type-II band alignment for a multilayer SnS/MoS2 heterostructure. The bottom-up growth of a nonisostructural heterojunction comprising 2D semiconductors expands the combinations of materials available for scalable production of ultrathin devices with field-tunable responses.

Multi-Step Crystallization of Barium Carbonate: Rapid Interconversion of Amorphous and Crystalline Precursors.

The direct observation of amorphous barium carbonate (ABC), which transforms into a previously unknown barium carbonate hydrate (herewith named gortatowskite) within a few hundred milliseconds of formation, is described. In situ X-ray scattering, cryo-, and low-dose electron microscopy were used to capture the transformation of nanoparticulate ABC into gortatowskite crystals, highly anisotropic sheets that are up to 1 µm in width, yet only about 10 nm in thickness. Recrystallization of gortatowskite to witherite starts within 30 seconds. We describe a bulk synthesis and report a first assessment of the composition, vibrational spectra, and structure of gortatowskite. Our findings indicate that transient amorphous and crystalline precursors can play a role in aqueous precipitation pathways that may often be overlooked owing to their extremely short lifetimes and small dimensions. However, such transient precursors may be integral to the formation of more stable phases.

A classical view on nonclassical nucleation.

Understanding and controlling nucleation is important for many crystallization applications. Calcium carbonate (CaCO3) is often used as a model system to investigate nucleation mechanisms. Despite its great importance in geology, biology, and many industrial applications, CaCO3 nucleation is still a topic of intense discussion, with new pathways for its growth from ions in solution proposed in recent years. These new pathways include the so-called nonclassical nucleation mechanism via the assembly of thermodynamically stable prenucleation clusters, as well as the formation of a dense liquid precursor phase via liquid-liquid phase separation. Here, we present results from a combined experimental and computational investigation on the precipitation of CaCO3 in dilute aqueous solutions. We propose that a dense liquid phase (containing 4-7 H2O per CaCO3 unit) forms in supersaturated solutions through the association of ions and ion pairs without significant participation of larger ion clusters. This liquid acts as the precursor for the formation of solid CaCO3 in the form of vaterite, which grows via a net transfer of ions from solution according to z Ca2+ + z CO32- → z CaCO3 The results show that all steps in this process can be explained according to classical concepts of crystal nucleation and growth, and that long-standing physical concepts of nucleation can describe multistep, multiphase growth mechanisms.